13266111188

XH-406C程序控制平板硫化機 Heat press machine
簡介:Introduction
將試驗用原料及配方料,通過額定壓力、溫度、冷卻后成型,使產品能符合要求的品質和檢測標準,其結果進行下一步物理性能測試或產品質量檢測。
Test raw materials and formulations are molded under rated pressure,
temperature, and cooling conditions, make the molded sheet meet thespecified quality and testing standards, and the results will used for thenext step of physical performance testing or product quality testing.
應用范圍:Application
新產品研發、配方優化New product development and formula optimization
產品質量控制和原材料檢測Product quality control and raw material testing
加工性能研究和工藝優化Processing performance research and process optimization
物理性能檢測前制樣Sample preparation before physical performance testing
教學科研應用Teaching and research application
產品特點 Product Features
滿足通用高分子材料的熱壓成型的基本要求;
Meet the basic requirements for heat pressing forming of general polymer materials
壓力自動補償功能,一次預壓與二次加壓, 自動進行加壓與泄壓;
Automatic pressure compensation function, primary preload and secondary pressurization, automatic pressurization and pressure release.
電熱板耐高溫、耐腐蝕、傳熱快、不易變形;
Electric heating plates are resistant to high temperature, corrosion resistance, fast heat transfer and not easy to deformation;
內置式密點發熱管,溫度精度高、均勻性好、性能穩噪音低;
Built in dense point heating tube, with high temperature accuracy, good uniformity, stable performance, and low noise
技術參數 (Technical Parameters):
型 號 Model No. | XH-406A | XH-406B | XH-406C | XH-407 |
控制方式 Control Mode | 手動型 Manual | 電動型 Electric | PLC控制 PLC control | 抽真空系統 Vacuum |
容 量 Capacity | 30/50/100噸或指定 30/50/100ton or customized | |||
溫度范圍 Temperature range | 常溫~300℃或指定 Room temperature~300℃ | |||
工作板尺寸 Size of working plates | 300×300mm或指定 300×300mm or customized | |||
工作層 Work layer | 單層加熱或冷熱一體機 Single layer heating or integrated cooling and heating | |||
冷卻方式 Cooling mode | 自來水冷卻 Water cooling | 自來水冷卻或線性冷卻 water cooling or linear cooling | ||
體積(W×D×H)Volume | 540×400×1250mm | 1100×600×1580mm | 1100×600×1580mm | 1500×600×1580mm |
重量(kg) Weight | 210kg | 780kg | 780kg | 900kg |
電 源 Power supply | 3∮,AC380 | |||
特殊型號可根據客戶要求設計制作。
Special models can be designed according to customers’ requirements

管理員
該內容暫無評論